1972 GEC 2112

Series 2110 Chassis


System: 625 Line

Original List Price : £268.00

Valves: None

Transistors: 20

TR1 BF362 R.F. Amp
TR2 BF362 R.F. Amp
TR3 BF363 Mixer-Oscillator
TR51 BU10/BU208 Line Output
TR101 BF196 2nd I.F. Amp
TR102 BF197 3rd I.F. Amp
TR151 BF196 1st I.F. Amp
TR201 BC148 Blanking Pulse Amp
TR301 BF336 Blue Output
TR302 BF336 Green Output
TR303 BF336 Red Output
TR401 BF335 Line Driver
TR451 BC147 Field Sync, Clipper Inverter
TR452 BC148 Discharge Switch
TR453 AC188 Field Output Driver
TR454 16335 Field Output
TR455 16334 Field Output
TR501 AC128 Clamp Diode
TR502 Ac128 Clamp Diode
TR701 BC147 H.T. Voltage Control
TR702 BC147 H.T. Delay *

Integrated Circuits: 9

IC101 TAA550 Tuning Voltage Stabiliser
IC102 TCA270Q Vision Detector, AGC Amplifier, AFC Generator, Video Amplifier
IC180 TBA480Q or TBA120SQ Sound Intercarrier/Amplifier Limiter/Detector
IC181 SN76013ND/07 or TBA800 Sound Output
IC201 TBA560Q or TBA560A/CQ Luminance/Chroma Control Combination
IC251 TBA540Q Reference Generator
IC301 TBA990Q or TBA520Q Chroma Demodulator/PAL Switch
IC302 TBA530Q RGB Matrix Preamplifier
IC401 TBA920Q Sync Sepearator/Line Oscillator combination

Diodes: 25

D1 BB105B Tuning Diode … These Next Four Are A Matched Quad
D2 BB105B Tuning Diode
D3 BB105B Tuning Diode
D4 BB105B Tuning Diode
D51 BZX79-C47 40V Overload Protection Zener
D52 EHT Tripler
D53 EHT Tripler
D54 EHT Tripler
D55 EHT Tripler
D56 EHT Tripler
D57 EHT Tripler
D201 BA154 Clipper Diode
D401 BA154 Starting Diode
D451 BA148 Clamp Diode
SCS451 BR101 Field Oscillator
D452 BA148 Flyback Diode
D453 BA154 Clamp Diode
D501 1N4148 Clamp Diode
D601 BY210-800 40V LT Scan Rectifier
D602 BZV15-C12R 12V Voltage Stabiliser
D603 BZV15-C24R 24V Voltage Stabiliser
D604 BA148 Beam Current Limiter
D605 BA148 Shift Voltage Rectifier
D701 17000 Thyristor Switching Diac
D702 BZY88-C7V5 HT Ref Stabilising Diode
D703 BA154 Starting Diode*
D704 BA154 Protection Diode *

*= Later Models

CRT: 22″ A56 120X

General Info:

The C2110, C2111, C2112 and C2118 models were all solid state and equipped to receive stations in either monochrome or colour on Bands IV and V. Colour demodulation is PAL.

For ease of servicing all panels can be unplugged for examination.

GEC 2112

gec14 gec15


Generally this set is in superb condition inside and out. The cabinet has a few scratches which are to be expected for a forty three year old set, these will be easily polished out. The electronics look mostly untouched, the only obvious change being a re-gunned CRT having been fitted. The tube is a Thorn “New Life” A56 120X.

Before anything else the CRT was put on the B&K 467 tester as this will determine if the set is a viable repair or not. All three guns were low but the Blue was very bad, I raised the heater volts to 8V and left the CRT running like this for about 20 mins. In this time the Red & Green improved greatly but the Blue gun was having none of it remaining in the bad section of the meter. I decided to run a clean and balance on the Blue gun, this removes the crud from the blue cathode giving a new/fresh emissive layer. Thankfully this worked a treat, with the Blue gun emission reading very high. I’m hoping with the set running under normal working conditions, the Red & Green will naturally improve themselves which is often the case.

I fed in Test Card F, tuned in and got a great picture. Slightly skewed raster which will just require the scan coils rotating. I will leave the set on soak test to see what faults arise but so far unlike a lot of the sets I find, this is a promising start albeit a little uneventful.


I’ve read a feature of GEC sets is the double-sided printed circuit board. I’ve yet to encounter one so this will be my first foray into that minefield. I’m aware that if one does not wish to learn the hard way, great care must be taken when components are removed from the board. Clearing holes of all solder is paramount. Connections are made on the printed side of the circuit board between the upper and lower print, so dry joints also have to be high on the radar.

gec2112-a gec2112-b gec2112-c gec2112-d gec2112-e gec2112-f


gec2112-k gec2112-g gec2112-h gec2112-jgec2112-l




gectest3 gectest1 gectest2

 GEC Panels


0 0 vote
Article Rating
Notify of

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Inline Feedbacks
View all comments
3 years ago

I always liked this chassis. It was generally reliable and gave good picture quality. One weakness was the push button channel selector unit. The versions that came fitted with touch buttons were always playing up due to faulty neons. We always converted them to push button units. The 20″ sets such as the C2110 were fitted with a tube of Japanese origin which always seemed to fail after about 3 years, usually the red gun. This problem also appeared on the hybrid 20″ C2115. For some reason, there were many TVs of various manufacturers that were fitted with theseJapanese tubes, including some 22″ Pye CT205s. The original label was often covered over by a Mullard label but the give-away was the phrase “Made in Japan” in very small print.

Peter Dolman
Peter Dolman
1 month ago

From what I can recall, these tidily engineered sets drew pretty heavily from the Mullard application sheets of the time. Nothing wrong with that, but back then IMHO the sets seemed less ‘adventurous’ in design than some of the thrilling offerings from some other makers. GEC also utilised their double sided printed boards in their dual standard mono TV sets, (the chassis type I forget). But I think that this print was often blamed rather more than it deserved. One just had to be very methodical to find where the dry joint was. They got into an awful mess if attacked with a soldering iron in hope rather than certainty! This looks a very nice example of this range of sets. I seem to remember they had a 47V zener diode and r-c network lifting the emitter of the line output transistor above ground. If so then this was known as the Mullard ‘Anti-boost’ circuit. The diode could act to protect, or crowbar the low voltage rail thus generated in the event of overvoltage and until a fault occurred its zener voltage was never reached. It was a low power device that, by design, would always become dead short in the event of overvoltage. It lived its life waiting to commit suicide for the greater good in the event of the regulated supply rail to the line timebase becoming excessive.
Happy days! Does anyone remember the Finlux Peacock or the Siemens FC211 sets?

Reply to  crustytv
1 month ago

I got the impression that many European sets imported by rental companies were considered to be a short term measure until the British manufacturers could keep up with the demand.

Often they were off-loaded at disposal auctions & either went to independent rental companies or filtered down to private owners. I presume spare parts were hard to source for many sets.

The French EMO sets are believed to be extinct in the UK, mostly due to the valves in the power supply being unreliable & hard to source.

Supposedly the companies who had them on rental ended up with a lot in the workshops awaiting repair, and many managers decided to withdraw them once they needed any major repairs and replace them with something more reliable.

Occasionally I’ve seen the odd continental set on eBay, mostly ones from the 1980s – 90s so later than you are looking for.

Would love your thoughts, please comment.x