Jayceebee

Change your cover photo
jayceebee
Change your cover photo
This user account status is Approved

Liked Forum Posts

RE: A Brace Of Co-op C2001s

That board looks fantastic, great work John, all your work studying Kicad has paid off. Regards the VA1056S, I've had a look through all my thermistor stocks, unfortunately sods-law dictates not a VA1...

In forum Colour Television

21 hours ago
RE: OWON XDM1041 Digital Bench Multimeter

The little switched-mode regulators turned up, they are indeed the same size as the 7805 TO-220 package. Attachment : 20220629_155039.jpg Attachment : 20220629_155040.jpg One was duly la...

In forum Test Equipment

1 day ago
RE: 1970/1 HMV 2025 Record Player (Yuck)

Here it is…. Will scan it properly for Chris to add to library later. help 😂 Attachment : ABF34648-9AF8-4DE7-9CFB-DC0858E52129.jpeg Attachment : 7F8ED08D-AC78-4B99-B668-C4B618A409...

In forum Audio & Hi-Fi

1 week ago
RE: Rediffusion "Guildford" RT 194/19 Dual Standard

I'm an idiot! 🙄 I mentioned earlier that I replaced all the dodgy capacitors... well it turns out that I missed C13: Attachment : 20220614_180428.jpg For some reason my brain didn't e...

In forum Black & White Television

2 weeks ago
RE: Hitachi MX910e

Posted by: @red_to_black That is the article (Alan.J.Roberts) it might have been a pen name of Sideband at the time 😉 Ahh foiled!! My cover obviously wasn't good enough!! I had to devise a pen name ...

In forum Video Recorders, CED, LaserVision, DVD & DTV

3 weeks ago
RE: Hitachi MX910e

I couldn't find anything written on the TurboDeck by @sideband, but I did find Alan J Roberts article from Feb 1999. I've added it to the knowledge base here.

In forum Video Recorders, CED, LaserVision, DVD & DTV

3 weeks ago
Tx 90 colour portable.

Hi Everyone Back in February this year my dearly loved aunty Dot passed away suddenly, I have inherited her little 14" Ferguson TX 90 colour portable which they purchased new from the dealer where I ...

In forum Colour Television

3 weeks ago
RE: Philips 17TG100U

Well, that was better than expected. After sorting out the arcing EHT rectifier heater winding, by removing it, and twiddling a few controls, the picture's damn good! Tube's a bit soft round the edges...

In forum Black & White Television

2 months ago
RE: Rediffusion "Guildford" RT 194/19 Dual Standard

Finally got round to refitting the board that I've just replaced the resistors and capacitors on and... Attachment : 20220510_205008.jpg Attachment : 20220510_205033.jpg That's a seriou...

In forum Black & White Television

2 months ago
RE: Rediffusion "Guildford" RT 194/19 Dual Standard

I videoed the whole process and uploaded it to YouTube. You get to hear me get excited when it powers up for the first time!

In forum Black & White Television

2 months ago
RE: Rediffusion "Guildford" RT 194/19 Dual Standard

So I thought I'd try out the tripler this evening. Attachment : 20220505_191355.jpg Attachment : 20220505_194444.jpg There's a very handy solder point where the PL504 cap connects to. Th...

In forum Black & White Television

2 months ago
RE: Bought another telly, GEC BT5145

Ok, so I may have gotten a little over excited with the rubber screwdriver handle……. Attachment : A7B067CE-7588-44C8-9493-4CAB3417C8E0.jpeg I noticed the screen would flash quite brightly when ...

In forum Black & White Television

2 months ago
RE: Rediffusion "Guildford" RT 194/19 Dual Standard

Replaced a few more dodgy looking capacitors and I'm seriously impressed with the picture quality of this TV now! 😀 Attachment : 20220404_212845.jpg There's still a little bit of rippl...

In forum Black & White Television

3 months ago
RE: 1960s Rediffusion Reditune TP48A

After much thought, mixed with a little procrastination, I figured out the best way to get into this, three snipped wires later, I'm finally in. Now I can get on with the task, and get all those fail...

In forum Audio & Hi-Fi

4 months ago
RE: 1970s Rediffusion Reditune TP80

I visited the local electrical motor specialist company this afternoon. It was such an amazing place, very old school, and so much of the kit in there was relatable. Plenty of old meters, vintage tin ...

In forum Audio & Hi-Fi

5 months ago
RE: 1974 HMV 2726 Coloumaster; Thorn 4000

Thanks Jim, that means a great deal coming from you. 👍 OK, today I removed the Horizontal/SMPS module, it's not been out before so other than the missing TF301 and the odd lash-up on the rear...

In forum Colour Television

5 months ago
RE: CNC Milling Your Own PCB

SD version of the Video now available, it will take a little longer for the HD version to be the default.

In forum Components, PCB's, Modules

6 months ago
RE: CNC Milling Your Own PCB

First full run, it worked but can be improved upon. I'm going to have another run, but this time using a 0.8 endmill. Attachment : 20220105_163717.jpg

In forum Components, PCB's, Modules

6 months ago
RE: 1974 20" Ferguson 3C03; Thorn 4000 ; Super Rare

Just to say, at this stage I won't be implementing any of the modifications. Rightly or wrongly, I've chosen at this stage to pursue the Matrix path, that choice has the most potential for me to screw...

In forum Colour Television

7 months ago
RE: 1974 20" Ferguson 3C03; Thorn 4000 ; Super Rare

The 75pF 500V 5% arrived today, still waiting on the final two components to complete the base PCB .27uF 250V and the 2.2uF 40V Non-polarised. I cut and shaped two matrix daughterboards, for TF401/TF4...

In forum Colour Television

7 months ago
Page 1 / 8