Lloyd

Change your cover photo
lloyd
Change your cover photo
This user account status is Approved

Forum Replies Created

RE: Panasonic UK: Training Video; G Deck VCR Strip Down & Alignment

I’m sure I’ve got a copy of this on VHS somewhere! Regards, Lloyd

In forum Video Recorders, CED, LaserVision, DVD & DTV

6 days ago
RE: Chinese arcade monitor chassis

Posted by: @crustytv , I would have thought this would be right up your street Lloyd.It most certainly is! I'm on the look out for a chassis for a smaller tube first though, I've still got that bra...

In forum Components, PCB's, Modules

1 week ago
RE: Chinese arcade monitor chassis

I've got 2 21" FST tubes in my lock up if anyone fancies having a go!! Regards, Lloyd.

In forum Components, PCB's, Modules

1 week ago
RE: What to do with a Philips T-vette...

Cheers Chris! I'll make sure I transfer it to the iPad this time, before my PC decides to get rid of it again for whatever reason! Regards, Lloyd

In forum Black & White Television

2 weeks ago
RE: What to do with a Philips T-vette...

Cheers for trying yours out! It sounds about the same as this one here, it certainly doesn't struggle with contrast, although it is a bit up near the top end of the control, there's still a little pla...

In forum Black & White Television

2 weeks ago
RE: 1974 20" Ferguson 3C03; Thorn 4000 ; Super Rare

It’s come up quite nicely! Looks very well packed in the cabinet, and the whole set looks tiny once it’s on your bench! if you decide the cabinet damage is too much you could always get some sticky ba...

In forum Colour Television

3 weeks ago
RE: What to do with a Philips T-vette...

I’m tempted to shove this thing back on the shelf for 2 years!! Maybe some of these really were mediocre at best on 625?! I did wonder if it was because I was displaying 16:9 content with black bars t...

In forum Black & White Television

3 weeks ago
RE: What to do with a Philips T-vette...

Sorry for the slight absence over the last few days! Not been feeling too good, spent far too much time sleeping than anything else.. I did get back to this little horror yesterday though, and did som...

In forum Black & White Television

3 weeks ago
RE: What to do with a Philips T-vette...

Spoke too soon, it's doing it again!

In forum Black & White Television

3 weeks ago
RE: What to do with a Philips T-vette...

Cheers, you both gave me some idea's what to look at, I stuck the scope on the collector of the sync separator (T4021) which is also the point for waveform number 3 in the manual, there was the requir...

In forum Black & White Television

3 weeks ago
RE: What to do with a Philips T-vette...

Cheers John, I'm just looking at the caps now, there's some right odd values in there! What would be best to replace a 1.6uF cap with? I've got some 1uF caps, or I can order some 2.2uF's, I'm going to...

In forum Black & White Television

4 weeks ago
RE: What to do with a Philips T-vette...

I thought we'd gotten to the bottom of this problem earlier! I found an attenuator, plugged it in, tuned in the set, and we had a perfect picture! No frame jitter, so I left it playing on the bench wh...

In forum Black & White Television

4 weeks ago
RE: What to do with a Philips T-vette...

Didn’t think of that! I’ll give it a shot, I’ve got some attenuators somewhere 🙂 Regards Lloyd

In forum Black & White Television

4 weeks ago
RE: What to do with a Philips T-vette...

This TV is doing my head in! Just when you think it's OK, it decides it's not!! I've discovered the frame sync fault is only present on 625 lines, 405 is perfect! So when a bright scene comes along th...

In forum Black & White Television

4 weeks ago
RE: 1974 HMV 2726 Coloumaster; Thorn 4000

Pleased you finally got one! I did see that one for sale, but didn’t realise it was a 4K! Regards Lloyd

In forum Colour Television

4 weeks ago
RE: What to do with a Philips T-vette...

We have life!!! The tube is in, the LT is set to 10.8V, the zener is fitted to the tube base straight across the heater, a fuse has been added, but it’s 500mA slow blow, the smallest fuse I have in st...

In forum Black & White Television

1 month ago
RE: What to do with a Philips T-vette...

I'm currently having a play with the crowbar (!), just wondering what rating of fuse to give it? I was thinking along the lines of around 100mA, since the tube heater only needs around 60mA, Also wond...

In forum Black & White Television

1 month ago
RE: What to do with a Philips T-vette...

That’s interesting! I wonder what causes it? Maybe I’ll make a thermometer out of it! I was reading your thread on your T-vette earlier, you certainly had a few problems with it! I’ve got a few photos...

In forum Black & White Television

1 month ago
RE: What to do with a Philips T-vette...

Well, it's still running over 20 mins later, and the 11V line is currently 10.88V, so it's not gone up much! It's on 625 lines, the 405 whistle was deafening! I've plugged the speaker in, and I've got...

In forum Black & White Television

1 month ago
Page 1 / 71