< Back

There’s no sound or raster, though the five fuses are intact
and voltages are present at the mains transformer
secondaries. The tube heaters, also the channel lights, glow.
The touch-type channel selectors work, but channel one
does not appear automatically when the on/off switch is
The touch -tune system depends on a voltage feed from
the line timebase, which is clearly not working, cutting off
the rest of the set. Check whether the 120V line is present at
the output of the series regulator transistor TR708, and that
it’s reaching the collector of the line output transistor
TR304. If not, check TR708, R414 (10S2), L403 etc. If
power is reaching TR304, suspect loss of line drive – there
should be 89V at the collector of the line driver transistor

Table of Contents

Leave a comment

I have read the privacy policy and accept
Read our privacy policy

This form collects your name, email and content so that we can keep track of the comments placed on the website. For more info check our privacy policy where you will get more info on where, how and why we store your data.

This site uses Akismet to reduce spam. Learn how your comment data is processed.