Thorn ICC6 Stock Faults

ICC6 BLANK RASTER TA7550 IN THE IF CAN.
ICC6 DEAD ,POWER OK RP04
ICC6 DEAD TL31 , DISCON PIN4 IC IR81 TO STOP TRIPPING
ICC6 FIELD BOUNCE TP06 ON TEXT PCB ADD RV02(1M) PTN 90256500
ICC6 FIELD/HORIZ JITTER TV71(BC858SM/BC857C)
ICC6 INT CHANNEL UP ,KEYBOARD MEMBRANE
ICC6 INT START CP29(470UF16V) IN CHOPPER BASE
ICC6 LOW BRILLIANCE (OSD AT MAX) REDUCE RR48
ICC6 LOW IF GAIN CS25(1UF) ON PIN13 OF LA7550 IN IF MODULE
ICC6 NO A1 VOLTS C814
ICC6 NO/INT VIDEO TV92(BC858BSM BC857C)
ICC6 1 REMOVING CHILD LOCK ,SWITCH TO STBY SWITCH OFF WITH MAINS WAIT 9 SECS
ICC6 2 SWITCH ON MAINS WHILE HOLDING STBY ON REMOTE FOR 6 SECS
ICC6 3 A RED KEY SHOWS IT IS LOCKED ,TOGGLE ON/OFF WITH +/- BUTTONS ON REMOTE”
ICC6 9 PULSES DEAD TL09(BC848),TF01(BC848B).
ICC6 BLANK RASTER TA7550 IN IF CAN
ICC6 CHANGES CHANS INT , MEMBRANE TOUCH PANEL
ICC6 CHILD LOCK1 SWITCH TO STBY, OFF AT MAINS WAIT 10SECS ON MAINS
ICC6 CHILD LOCK2 HOLDING STBY ON REMOTE FOR 6 SECS ,TOGGLE +/- REMOTE
ICC6 DEAD NO STBY LED , PSU OK RP04
ICC6 DEAD TL31 PIN4 IC IR81 TO STOP TRIPPING
ICC6 FIELD JITTER TV71 SM BC858
ICC6 HORIZ JITTER BC858/BC857C TV71.
ICC6 INT BLANKING BC858B/BC857C SURFACE MOUNTED TRANSISTOR TV92.
ICC6 INT CHANNEL CHANGE , KEYBOARD FOIL .
ICC6 INT PIC BLANK RASTER BC858B/BC857C(TV92).
ICC6 INT SCROLL THRO CHANS KEYBOARD MEMBRANE
ICC6 INTERMITTENT START CHOPPER DRIV CP29 470UF16V.
ICC6 LED RED THEN GREEN THEN OUT TDA1171 IF01.
ICC6 LO BRILL(OSD AT MAX) ADD 5K6 ACROSS RR48
ICC6 LOPTX (DST88N243/47310050) HR7269, SPARKING 25K-4KV +CAP 3KV A1’S.
ICC6 LOW IF GAIN CS25 1UF FROM PIN 13 OF LA7550 IS10 IN IF MODULE
ICC6 NO A1’S/G2 VOLTS C814
ICC6 NO RASTER SOUND OK, TB11,
ICC6 NO VIDEO O/P INT TV92 BC858B SM
ICC6 OSD=P1 RESET HOLDCHANUP/CHANDWN AND POWER ON.
ICC6 POOR TAPE PB MOD CV86(8.2NF) RV64(12K)RV66(15K).
ICC6 SOUND OK ,NO PICTURE TB11.
ICC6 START SURGE ONLY TDA1771 FIELD TIMEBASE CHIP IF01
ICC6 PICTURE TOP CRAMPING TDA1771 REPLACE.
ICC6 WARM LINE TWITCH TV71(BC858B/BC857C SM).