Thorn ICC9 Stock Faults

You are here:
< Back

ICC9 3LEDS/DEAD NO LINE DRIVE.TL63 (BC848B)
ICC9 ALL SORTS EEPROM SET UP
ICC9 B59F NO PIC/SND BLANK RASTER TX07, BC846B SM ON PRINT SIDE OF THE PCB.
ICC9 BENT SIDES CL42 4U7F160V
ICC9 BLACK LINE DOWN , C123 NR SCAN COILS
ICC9 BLANK RASTER COLD FLASHES TC03 BC858 SM
ICC9 BLANK RASTER LA7550 IC INSIDE THE IF MODULE.
ICC9 BLANK RASTER TX09(BC858B/BC857C SM).
ICC9 BLANK RASTER TX16(BC858B SM) AREA F7.
ICC9 BLANK RASTER+NO SCART VID O/P, LA7550 IN IF MODULE.
ICC9 BLANK SCREEN, POOR SCART PIC LA7550 IC IN IF
ICC9 BRIGHT GREEN SCREEN,CHROMA DECODER CHIP.
ICC9 BRIGHT SCREEN, 10R-SAFETY RESISTOR RB06 RB07 ON THE CRT BASE PANEL.
ICC9 BUH517TH LOPTR CAUSE 2SC2655 DRIVER TL61.
ICC9 COLD BLANK RASTER TC03(BC858SM)
ICC9 COLD FLASHING PIC ,TC03(BC858SM).
ICC9 COLD NO PIC, TC02 BC848 , TC03 BC858,
ICC9 D51ND DARK/LO WIDTH LOPTX DL61 1N4001,
ICC9 DEAD TL19 LOPTR BUH517TH,TL61 LINE DRVTR(2SC2655).
ICC9 DEAD ,HT OK,LOPTX+IC TDA8172.
ICC9 DEAD CL24 0U33F250V S2000AF1 LOPTR.
ICC9 DEAD INT TR85(BC848B) TR87(BC858B).
ICC9 DEAD LED FLASHING TP78 BC848B.
ICC9 DEAD LOPTR TL61 2SC2655.
ICC9 DEAD LOPTR + 6 * 1N4001.
ICC9 DEAD LOPTR BUH517TH TL19+ 2SC2655 NPN TL61.
ICC9 D51ND WONT SWITCH ON FROM STANDBY (ok from switch)
REPLACE CP14, DP34 AND IP01 IN THE POWERSUPPLY SECTION.
ICC9 No picture
Check / replace RV32 (4.7K) in the centre of the panel
ICC9 D51ND STUCK IN STANDBY OR HAS A BLANK RASTER
REPLACE SURFACE MOUNTTRANSISTOR TR81 (BC858C).
ICC9 D51ND Dead, only H.T (165v) at the l.o.p.t/
Check for failure of the field O/P CHIP (TDA8172).
ICC9 LINEOUTPUT TRANSISTOR S/C (REPLACEMENT GETS TOO HOT)
CHECK DL61 (IN4001) WHICH FEEDS 7.5VOLTS TO THE LINE DRIVER.

Table of Contents

Leave a comment

I have read the privacy policy and accept
Read our privacy policy

This form collects your name, email and content so that we can keep track of the comments placed on the website. For more info check our privacy policy where you will get more info on where, how and why we store your data.

This site uses Akismet to reduce spam. Learn how your comment data is processed.