TX 807 Stock Faults

TX807 AERIAL SOCKET/TUNER MTM-BG-2024.
TX807 BLUE CAST,DT71(1N4148) ON CRT BASE.
TX807 CHILD LOCK, HOLD MAGENTA AND POWER UP,FOR 5 SECS
TX807 DEAD 6 SECS OF GREEN LED DL04(BY228)
TX807 DEAD DP27 24V ZENER
TX807 DEAD LED PULSING,CHILD LOCKED
TX807 DEAD LOPTX+DP10+RP92+DP90+DP21(2V7ZD)+CP08.
TX807 DEAD RP01(5R1),CHOPFET(P3NA80FI)
TX807 DEAD RP01(5R1),CP09(1500PK1KV) BURN MARK ON HEATSINK
TX807 DEAD STBY FLASHING=CHILDLOCK
TX807 EEPROM REMOTE STBY,POWER OFF,POWER ON WITH MAGENTA HELD ,PRESS MAGENTA AGAIN.
TX807 EHT SURGE ONLY,RP68(0R68) NR LOPTX.
TX807 FLASHING LED STBY,YOU NEED REMOTE TO RELEASE
TX807 LO HEIGHT EEPROM
TX807 LO SND(HOTEL MODE)STBY/POWEROFF/WAIT/HOLD MAGENTA POWERON/MAGENTA
TX807 LOPTR S2000AF(BU508AF)+2R75W TOPTEL 053 NO TUNING.
TX807 NO CRT HEATERS GREY LEAD FROM MAIN PCB TO TUBE BASE DRY JOINTED
TX807 NO SND EEPROM
TX807 NO TUNING RL51 1R8 IN 6V LINE FROM LOPT
TX807 POOR START DP57 6V8 ZENER
TX807 PROLINE 1415T NO SND EEPROM
TX807 PROLINE 1415T NO SOUND, PIC OK. EEPROM CORRUPTED.
TX807 SEE TV MAG JAN 2002 FET CHOPPER
TX807 SERVICE MODE 1, SWITCH THE SET ON.
TX807 SERVICE MODE 2. USE THE REMOTE CONTROL UNIT TO PUT IN STANDBY.
TX807 SERVICE MODE 3. SWITCH THE SET OFF.
TX807 SERVICE MODE 4. SWITCH ON AGAIN WHILE HOLDING DOWN THE MAGENTA HANDSET
TX807 SERVICE MODE 5. WHEN THE PICTURE APPEARS, PRESS THE MAGENTA KEY AGAIN.
TX807 SERVICE MODE,
TX807 SERVICE MODE, POWER ON,REMOTE STBY,POWER OFF,POWER ON+MAGENTA +MAGENTA
TX807 SERVICE MODE,REMOTE STBY,MAINS OFF,WAIT 15SECS,HOLD MAGENTA,MAINS ON
TX807 SLOW START, DP57(6V8ZD).
TX807 STBY DP12 DP36 BA157 – BEWARE OF CHARGED UP SMOOTHER!
TX807 TO RUN LOP STAGE DIS’D DIS PIN 1 LOPTX , BASE TP52 TO CHASSIS. CONNECT LAMP TO DP80 ; HT = 105V
TX807 TO RUN WITH LOP STAGE DIS’D DIS PIN 1 LOPTX & BASE TP52 TO CHASSIS. CVONNECT LAMP TO DP80 ; HT = 105V
TX807 TRIPS LED RED/GREEN PIN 50/TDA8842 SHOULD BE <3.85V, IF NOT PROT MODE
TX807 TRIPS RL20, DL20,
TX807 VERT LINE LHS CL01 10NF
TX807 WEAK DIST SND CI04(10NSM) NR SND DET LI02
TX807CS NO SND EXCEPT SCART MULTI-SND PROCESSOR IS100 (MSP3415D-PO).
TX80E LO SND CS14(1UF) IN IF UNIT
TX80E LO SND HOTEL MODE