This searches the Website not the forum

TX 92 Stock Faults

< Back

TX92 GOODMANS GD2880B
TX92 INT PIC/SNOW , IF TRANSISTOR SM RESOLDER ALL
TX92 OSD=P1/NO REMOTE RESET HOLDCHANUP/CHANDWN AND POWER ON
TX92 THOMPSON.
TX92 1 COLOR GONE 82K RGB FEEDBACK RESISTORS RB24/44/64 RV17 82R
TX92 1 COLOR GONE RV18 AND RV16 BOTH 120R ,100NF CHIP CAPS. CV10/11/12.
TX92 BLANK TEXT TT01(BC848).
TX92 BRILL ON LHS ,TUNER UNIT
TX92 DEAD BRIDGE CHOPFET STP6NA60F1+TDA4605-3 +CP13 1N5F1K6V .
TX92 DEAD BY297 DP53 TDA4605-3
TX92 DEAD CHOPTR+ DP17(15VZD) RP10/RP11/RP12(180K).
TX92 DEAD CP13(1N5F16KV) RP11(180K) OPTO CNY75G,RP7(180K)RP08 RP14(270K)
TX92 DEAD FLASHIN LED,LOPTX+RL08SM,DL08 DL80 DL81(LL4148) TL80(BC548) DL83(24VZD)
TX92 DEAD LED FLASHING,CHILD LOCKED PRESS REMOTE 8 BUTTON
TX92 DEAD LED PULSING LOPTX,LOPTR,RL08(SM)
TX92 DEAD LOPTR +LOPTX.
TX92 DEAD RL08 10K , LOPTX & EEPROM
TX92 DEAD SURGE DP55(1N4001/BYV1040).
TX92 DEAD SURGE,DL21(BY228) CL21,RL47(4R7)
TX92 DEAD TP16(FET),CP13,TDA4605,DP51(BY399) DP53(BY297).
TX92 DEAD WHINING ,LOPTX
TX92 EHT SURGE STBY/TRIPPED TL60(BC548B SM)B/E TO OVERIDE F7 UNDER PCB.
TX92 HI BRILL/DEAD RL11(15R) FROM PIN 2 LOPTX,TEA5101B ON CRT PCB
TX92 HOTEL MODE TV IN STBY, POWER OFF, POWER ON HOLDING RC STBY,SET VOL HI
TX92 HOTEL MODE,1 TV TO STBY, THEN POWER OFF, THEN ON WHILST HOLDING REMOTE STBY
TX92 HOTEL MODE,2 AND STEP THROUGH MENUS TO `VOL SET` AND INCREASE LEVEL TO MAX.
TX92 INT COLD START RP28(1R).
TX92 INT DEAD CP52(100UF200V)
TX92 INT WIDTH , RESOLDER LOPTX AREA +RL47(2R7)
TX92 INT WIDTH TL41,NR LOPTX
TX92 JUST SNOW OSD OK, TUNER UNIT.
TX92 LED FLASH,LOPTX + EEPROM
TX92 NO PIC O/C HTR PINS.
TX92 NO PIC SND OK,HTRS AT CRT BASE PINS.
TX92 NO SND,BC848B SM TS90.
TX92 NO TTEXT SAA5281 BC848C TT01
TX92 POOR COLD START/PULSING RP28(COIL 1R)
TX92 RANDOM CHANNEL CHANGE IR RECIEVER
TX92 STBY DF30(BAV103).
TX92 STBY LOPTX PINS
TX92 STBY ON/OFF SWITCH AUX CONTACTS
TX92 TUNER DRIFT/JUMP OFF STATION SCART OK TUNER (MTM-4045 E0).
TX92 WARM SNOWY,TUNER UNIT
TX92F FERGUSON FE7060
TX92F INT SND MUTE TS81 TS90(BC848B) BLANKET RESOLDER
TX92F INT PIC FADES, RESOLDER CRT BASE PCB
TX92F INT STBY CP13
TX92F TOP FOLD OVER ,CF30(47UF50V)
TX92F SET TRIPPING WITH LED FLASHING ON/OFF- RL08 O/C (10K SMD) ON PIN 8 OF LOPT. IF THIS RESISTOR IS OPEN CIRCUIT THEN THE LOPTX WILL ALSO NEED REPLACING.

0 0 votes
Article Rating
Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0 Comments
Inline Feedbacks
View all comments
Table of Contents
0
Would love your thoughts, please comment.x
()
x