TX 99 Stock Faults

< Back

TX99 680R+IN4007+CHOPTR.
TX99 BLANK RASTER/FLYBACK, R208(3K3),R335(4R7) ON TACS BOARD.
TX99 CHOPPTR(TIPL761A/BU508A)+ (TDA4600-2)+270K+100UF25V+SNUBBER
TX99 DEAD CHOPTR BU508A+1R8W/W 270K1W 2*1N4007 +D10
TX99 DEAD L21 IN THE POWER SUPPLY
TX99 DEAD LOPTR(R4050) + RESOLDER TDA4505 CHIP.
TX99 DEAD/STBY IC6 HSINK EARTH,IC405(12V),C86(220UF).R334(4R7),R335(4R7).
TX99 EXCESS WIDTH = SCAN PLUG REVERSED
TX99 FIELD COLLAPSE,R134-R137+TR5(TIP29B)TR6(TIP111)R109(33R)R108(91R)D30(56V).
TX99 FIELD JITTER/COLLAPSE C16(1NF).
TX99 FIELD LIN/HEIGHT C102(33UF),R117(2R).
TX99 FLASHING PIC,BANK OF 1K ON TACS BOARD FEED TO 30V.
TX99 HAVE CCT DIAG.
TX99 HOT SND,RED LED D5 BEHIND TUNER, GLOWS WITH VOLUME.
TX99 INT SND/DISPLAY FLICK, EARTH FROM TUNER-TAC-TEXT BOARDS,TDA4505M.
TX99 INT SPOTS/FLASHING L21(HT SMOOTHIMG) .
TX99 INT TUNER 06M8-020-006 +6*2K0R1W.
TX99 JUST SNOW R334 4R7
TX99 LINS ON PIC,INTERFERANCE, IC242 5VREG.
TX99 LO HT,C103 47UF, 160V
TX99 LOPTX ARCING HR7453.
TX99 NO 18V LINE ICP+CHOPTX PIN7 INTERNAL/REMOVE DO ALL.
TX99 NO PIC EHT OK, R239(100R),IC241(M494B1).
TX99 NO PIC/SND M494B1
TX99 NO PIC/SND/TUNING/CHANEL CHANGE,IC241,R239.
TX99 NO RED TR25(BF869)+TDA3301B.
TX99 NO REMOTE ACTION, INFRARED RECEIVER
TX99 NO SND D5(MV57123).
TX99 NO SND/PIC R335(4R7).
TX99 NO TELETEXT PLUG PL22, WHICH IS JUST TO THE LEFT OF THE LOPT.
TX99 NO TEXT ,NO 9V FEED FROM LOPTX TO TEXT.
TX99 NO TEXT TR2(BC307B), R131(0R22),LOPTX PIN 9.
TX99 ONLY CHAN 1, SNOW IC243(30V REG)
TX99 PIC FADES SLOWLY , CRT HEAR FEED FROM LOPTX PINS.
TX99 SND PULSING COLD , DISCONNECT FROM T/TEXT LINK.
TX99 TRIPPING, LO 115V D17(BY500) LEAKY.
TX99 TUNER DRIFT,IC241(M494),IC243(MVS460-2) 33V REG.
TX99 WARM NO SND RED LED D5. JUST BEHIND THE TUNER.
TX99 WARM WIDTH SEVERE MIDDLE CRAMP,R103+R104 (1K5).

Previous TX 98 Stock Faults
Next TX10 Stock Faults
Table of Contents
0 0 vote
Article Rating
Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x