This searches the Website not the forum

TX80 Stock Faults

< Back

TX80 B14R DEAD/WHISTLE/FIELD COLLAPSE RP68 0R68
TX80 B14R LO WIDTH/BUZZ, DP15, 1N4001 DIODES
TX80 BLANK RASTER, CLEAN MICROPRO AREA
TX80 BUZZ/LO WIDTH/LOCK OSD ,DP15(IN4001).
TX80 CHILD LOCK RELEASE, SW TO STBY THEN ON AGAIN WITH R/C
TX80 CHILD LOCK,SWITCH TO STANDBY THEN BACK AGAIN. USING THE REMOTE
TX80 DARK PIC CRT BASE PINS/SOCKETS.
TX80 DARK PIC, CRT RIBBON CONNECTOR
TX80 DEAD BUZZING LP03 RP50
TX80 DEAD D710
TX80 DEAD DP65 BY397 FUSE FB072.
TX80 DEAD FUSE DEGAUSS POSISTOR
TX80 DEAD HUM,DP50(150V ZD) NR A1’S POT ON LOPTX + CP40
TX80 DEAD HUM,DP50(150V ZD) NR A1’S POT ON LOPTX + LINKS UNDER LOPTX
TX80 DEAD LOPTR(S2000) 100UF,35V CP08.
TX80 DEAD RP01(27K) D710 RP36(75K).
TX80 DEAD STBY 2V 9K1 9W STARTUP RP17 DP36(BA157)
TX80 DEAD WHISTLE RP68
TX80 EXCESS RED RV110 TV01.
TX80 FIELD COLLAPSE 24V OK DP18 BA157 NR LOPTX
TX80 INT FLYBACK LINES DF04 BA157
TX80 INT HEIGHT, CRACKED PCB NR LOPTX.
TX80 INT RED TV101/RV110/PV101/PV104.
TX80 LO WIDTH HUM BAR DP15 1N4001 IN BASE TP10
TX80 LOPTX=HR7336/HR7172.
TX80 NO BRILL, RP68(6R8) DP18
TX80 NO COLOR R171 270K
TX80 NO SND SPEAKER 16R 2W
TX80 OK 250V DEAD 12V TD701 TD702 DD707.
TX80 OSD “LOCK” LO WIDTH DP15 1N4001
TX80 POOR RASTER/HUM BAR DP15(1N4001) TP10 DRIVE
TX80 SND BUZZ , XTAL 6MHZ Q102
TX80 SNOW VARICAP TUNER MTP-I-2021 .
TX80 STBY DP12 BA157 FROM PIN 7 OF TRANSFORMER.
TX80 STBY DP12(BA157) FROM LOPTX, RP36(75K)
TX80 STBY DP36 BA157
TX80 STBY LED, RP71 9K1 DP36 BA157,
TX80 STBY LOPTR +RP01 27K RP36 75K, 3W
TX80 STBY RP37 DP45 RP36 775K, 2W
TX80 STBY,DP12 DP36 BA157.
TX80 STBY. RP36(75K) 2 WATT
TX80 STRIATIONS 27K NR LOPTX
TX80 THOMSON CHOPPER/LOPTR S2000A3.
TX80 TUNER TX80 UNIT MTP-I-2021 30768400 EIA55391464
TX80 WEAK LINE DRV/POWER DP15(1N4001).
TX80 WEAK/DIST SND CI04 10NF SM.
TX80 WIDTH INT CP18

0 0 votes
Article Rating
Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0 Comments
Inline Feedbacks
View all comments
Table of Contents
0
Would love your thoughts, please comment.x
()
x